top of page

CopperMai vs. Coppermascus®: Which Copper Damascus Should You Use?

4 days ago
3 min read

Both have copper in the layers and both etch up with that copper-and-steel contrast. They're built for different jobs, though, and picking the wrong one for a blade is the most common mistake we see. Here's the short version: CopperMai is a blade steel. Coppermascus is a cladding material.

What Coppermascus Is

Coppermascus copper Damascus endcuts, layers of copper and high-carbon steel

Coppermascus is our copper Damascus: alternating layers of copper and high-carbon steel, forge welded into one bar. Baker Forge® developed it in 2020 with a fusion welding process that bonds copper directly to carbon steel without a pure nickel layer between them.

What Coppermascus doesn't have is a solid core. Every layer of steel in the bar is broken up by copper, so there's no continuous run of hard steel to carry an edge. That makes it a poor choice for a blade on its own.

Where it shines is as a material to build with:

  • Cladding for San Mai and laminated steels. This is its main job, and it's what we use it for in our own steels.

  • Bolsters, guards and fittings, where you want the copper look without needing an edge.

  • Jewelry and small accent pieces. Our Coppermascus endcuts go to rings, pendants and medallions.

What CopperMai Is

Chevron CopperMai billet, Coppermascus cladding over a solid high-carbon steel core

CopperMai is copper San Mai. We take Coppermascus and forge weld it as cladding onto both sides of a solid high-carbon steel core. When you grind your bevels, the core becomes the cutting edge and the Coppermascus stays on the flats.

You get the copper contrast where people look at a knife and real edge steel where it cuts. That's what makes CopperMai a blade material and Coppermascus not.

CopperMai comes in a few builds:

  • Shim versions (Ni Shim, Cu Shim) add a thin layer of pure nickel or copper between the core and the cladding. That frames the core line with a bright or copper-colored border.

  • Damascus core versions (DamCore) swap the solid core for a carbon Damascus core, so the edge shows a pattern too.

  • Elite CopperMai uses Elite Coppermascus cladding, a tri-alloy of high-carbon steel, copper and pure nickel, for an extra color in the layers.

Side by Side

  • CopperMai: solid high-carbon steel core with Coppermascus cladding. Built for blades: EDC, kitchen, hunters and fixed blades.

  • Coppermascus: copper and high-carbon steel layers, no solid core. Built for cladding, bolsters, guards, jewelry and accents. Not for blades by itself.

Working with Copper Laminates

Heat treat for the core. With CopperMai, the cladding goes along for the ride. Heat treat at full thickness before grinding bevels, and follow the spec sheet for your exact steel on our Heat Treat page. Cores can change from one run to the next, so always go by the sheet for the bar you bought.

Don't laser cut it. Copper layers don't play well with laser cutting. Profile copper laminates by water jet, saw or grinder instead.

Etching. Clean with Grime Reaper first, then:

  • CopperMai with a solid core, and Coppermascus: Gator Piss® Heavy.

  • CopperMai with a 1084/15N20 Damascus core (DamCore): Gator Piss Original, which keeps the Damascus pattern crisp.

Seal the etch with Gator Skin®. Find all three on our Gator Piss page.

Care. Treat the flats like carbon steel: wipe them dry and keep them oiled or coated. We've had zero customer complaints about corrosion on our copper laminates, and our own crew uses chef knives made from them in the kitchen every day.

Shop Copper Laminates

Every bar is pictured as the exact bar you'll receive, priced by size. All billets are steel only, not finished knives.

Comments


bottom of page