top of page
Search


How to Etch Stainless Damascus with Gator Piss® MAX
Etch in cycles for depth, buff between cycles, finish with a color etch, then neutralize and seal. No heating needed.

bakerforgeandtool
4 days ago3 min read


How to Heat Treat CopperMai: A Knifemaker's Guide
Aim at the steel core, keep the copper safe, quench point down, temper right away. Recipes are on our spec sheets.

bakerforgeandtool
4 days ago3 min read


CopperMai vs. Coppermascus®: Which Copper Damascus Should You Use?
CopperMai has a solid steel core for blades. Coppermascus is copper Damascus built for cladding, bolsters and accents.

bakerforgeandtool
4 days ago3 min read


San Mai Steel: A Knifemaker's Guide to Blue Ridge, Wrought Iron and Copper SanMai
What San Mai is, how Blue Ridge SanMai (Hitachi Blue #2 in 410) and Wrought Iron SanMai differ, and how to heat treat and etch them.

bakerforgeandtool
4 days ago4 min read


Stainless Damascus Buyer's Guide: 154CM / AEB-L, Heat Treat and Etching
What's in Baker Forge stainless Damascus, how to size a billet, and how to heat treat and etch 154CM / AEB-L so the pattern comes out right.

bakerforgeandtool
5 days ago6 min read


Boosting Your Knife Sales with Baker Forge® Damascus: The Power of Copper-Infused Steel
As a knifemaker, you are constantly striving to create blades that not only excel in performance but also captivate the discerning eyes...

John Stephens
Oct 9, 20232 min read
bottom of page
